< Home

< Contact Us

< Back
Teletrol Integrator Network Level Controllers
Integrator 186 Controller
Designed for stand-alone control applications and for use as a system coordinator in applications where networks of Teletrol MINC controllers are used for distributed control, the Integrator 186 can be configured with internal inputs and outputs and supports Teletrol's ValueTRAC Modular I/O system.

The Integrator 186 also supports networks of application specific controllers which are used for control of VAV boxes, packaged HVAC units, heat pumps and other unitary equipment.
  • Supports modem, local workstation and LAN/WAN communications
  • Fully programmable using industry standard language
  • Networks with other Teletrol products on high-speed, multi-user LAN
  • Supports Open Protocol Bus for interface to terminal unit controllers
  • Full function supervised manual overrides on all internal outputs
  • Records history samples and statistics on all points
Integrator CS Controller
The Integrator CS provides support for networks of application specific unitary controllers and the ValuTRAC modular I/O system. The CS can be used for stand-alone systems or can be used as a part of an Integrator system network.
  • Use as a communications supervisor for stand-alone systems or as a part of an Integrator network
  • Provides cost effective communications, history logging and control supervision of application specific controller networks
  • Supports Open Systems Port for interface to other intelligent devices
  • Fully programmable using industry standard language
Integrator 486 Controller
The Integrator 486 is the largest of the network level controllers in the product family, capable of handling up to 128 internal input/output points plus up to 128 application specific TSC controllers or 127 additional external input/output points.
  • Based on standard PC platform for long-term compatibilty
  • True peer-to-peer network architecture with built-in multi-user support
  • fully programmable using industry standard programming language
  • Open System Port features allows direct interface to other systems
  • Modular internal and external binary and analog I/O systems
  • Powerful information management tools such as data and alarm logging, statistics collection, and more
MINC Controller
The MINC (Modular Integrated Network Controller) is a stand-alone controller designed for distributed control applications and expansion of Integrator control systems. The MINC provides direct digital control capability and a built-in LAN port.

The MINC uses modular I/O cards for maximum application flexibility and can be configured with 14 universal inputs.
  • Modular I/O design lets you choose just the I/O you need
  • Can be interfaced to other control systems
  • Locate I/O points at the field equipment to reduce wiring costs
  • Optically isolated binary inputs and outputs
Modular I/O
ValuTRAC

The ValuTRAC I/O System for Integrator Controllers is a family of modular input/output devices that can be used with all Teletrol's Integrator system level controllers. The ValuTRAC system consists of two basic components: ValuTRAC Transceiver modules and ValuTRAC I/O modules.

ValuTRAC Transceiver modules connect to the controller via a RS-485 communications bus and each can support up to 16 I/O points.

Flexible and easy to install, ValuTRAC lowers installation costs because they can be placed near the equipment being controlled and can interface directly to most devices. ValuTRAC I/O communication modules include Binary Input, Binary Output relay, Binary Output Heavy-Duty, Dual Output Triac, Pulse Counter/Binary Input, Analog Input, Analog Output, and the RTD Conditioning Module.
  • Modular I/O design lets you choose just the I/O you need
  • Can be interfaced to other control systems
  • Locate I/O points at the field equipment to reduce wiring costs
  • Optically isolated binary inputs and outputs
Application Specific Controllers
SimpleSTAT
Integrated actuator/controller for VAV application
  • Built-in software allows air balancing from the sensor for VAV applications
  • Highly reliable and accurate thermistor never requires calibration
  • Configuration Mode allows users to adjust the occupied and unoccupied setpoints
  • Provides measurement and display of room temperature
Teletrol's SimpleSTAT combines the features of an advanced rooftop unit (RTU) controller, a distributed energy management system node and a zone control thermostat in a compact enclosure suitable for interior wall mounting.
i-VAV TSC
Integrated actuator/controller for VAV application
The i-VAV is part of the Integrator TSC family of application specific,or unitary, controllers. It offers an integrated Belimo actuator motor, built-in airflow sensor and a custom molded enclosure for quick installation and many years of reliable operation for the most demanding VAV applications

Teletrol's i-VAV TSCs have been designed to fully integrate into the Integrator family of building automation controls.
  • Precise, stand-alone control for VAV applications
  • Local communications via laptop from the room sensor
  • Pre-programmed sequences for most VAV applications
  • Easy to configure with pre-programmed on-board dip switches
  • Easy and quick to wire with removable connectors
  • Fully integrated with the Integrator controllers
TSC
Terminal unit controllers
Teletrol's TSC is a family of application specific controllers designed to provide cost-effective control of terminal and unitary HVAC equipment. The TSC products are available in a number of different versions for control of variable air volume terminals, fan coil units, heat pumps and packaged HVAC and AHU units.
  • Stand-alone control for VAV, heat pump, packaged HVAC unit and more
  • Local communicatoins via laptop from the room sensor
  • Pre-programmed sequences for most unitary applications
  • Supports custom sequences for specialized applications
  • Input/output configurations can be customized
  • Fully integrated with the Integrator controllers
RMSIII
Room sensor with integrated display
The RSM III sensor provides measure and display of room temperature and a convenient interface for tenants and facility personnel when used in conjunction with the TSC family of controllers. Users can adjust the room setpoint, override occupancy and modify the TSC unitary controller operating parameters from the sensor. The built-in software even includes an Air Balancing Mode to make VAV box setup a snap.
  • Built-in software allows air balancing from the sensor
  • Highly reliable and accurate thermistor
  • Provides room temperature with convenient interface for tenants and facility personnel
Top of Page